Open/Close Menu Custom Paints & Coatings

CONTACT US NOW
sales@tcblends.com

CALL US NOW:
810-407-6937

Interior wood floors, trim, furniture, doors and any interior wood surface where a tough long lasting clear finish is desired.

PROPERTIES & ADVANTAGES – An alkyd resin varnish which produces a pale, tough and abrasive resistant finish. It is excellent for church pews and seats because it does not soften under body heat and high humidity.

FINISH – Gloss – (60° Gloss – 75+)

COLORS – Clear

SPREADING RATE – 690 sq. ft. at 1 mil dry film thickness

DRYING TIME – 1-2 hours tack free 8-10 hours dry

VISCOSITY – 45-60″ @ 80°F #4 Ford Cup

THINNING – Mineral Spirits

SURFACE PREPARATION – Surface must be clean, dry and free of wax or grease. New Wood should be sealed with TCB Seal fast or reduce Quick Dry Floor & Trim Varnish with 10% mineral spirits and apply. Finish with 1 or 2 coats at full strength. Previously varnished surfaces should be lightly sanded for better adhesion. New open grain woods should first be filled with TCB Paste Wood Filler.

APPLICATION – Brush – Spray

EQUIPMENT CLEAN UP – Mineral Spirits

PACKAGING – Gallons – 5 Gallon Pails – 55 Gallon Drums

FLASH POINT – 105°F

COLOR % TOTAL SOLIDS % PIGMENT SOLIDS % VEHICLE SOLIDS % VOLUME SOLIDS CONTRAST RATIO
Clear 51 .6 51 .6 43.5
© 2018 TC Blends