Exterior or interior steel, iron, wood and cement wherever a tough chemical resistant paint is required.
PROPERTIES & ADVANTAGES – Eponite is an oil modified one package material. It has except- ional resistance to chemicals, fumes, heat, moisture and weather making it a very popular coating in many industrial plants where these conditions exist around machinery and other equipment and surfaces. It is pre-plasticized and is packaged ready to use. It does not contain strong solvents and therefore does not cause lifting of old paint when applied over it.
FINISH – 60 Gloss – 85 (Gloss)
COLOR – As desired
SPREADING RATE – 400 sq. ft. at 1.5 mil dry film thickness
DRYING TIME – To touch 1-2 hours Hard 5 hours To recoat 18 hours
VISCOSITY – 60 – 65 KU
THINNING – Eponite Reducer or Mineral Spirits
SURFACE PREPARATION – Surface must be clean, dry and free of all wax, grease, oil and loose scaly paint. Bare metal should be primed with a TCB Metal Protective Primer. Wood and plaster should have 1 coat TCB Pigmented Sealer. Finish with 1 coat of Eponite full strength. Concrete may be primed with Eponite reduced 20%. Repaint work may be painted directly over after cleaning.
APPLICATION – Brush – Roller – Spray
EQUIPMENT CLEAN UP – Eponite Reducer of Mineral Spirits
PACKAGING – Gallons – 5 Gallon Pails – 55 Gallon Drums
FLASH POINT – 100F
GRIND (HEGMAN) – 7
| COLOR | % TOTAL SOLIDS | % PIGMENT SOLIDS | % VEHICLE SOLIDS | % VOLUME SOLIDS | CONTRAST RATIO |
|---|---|---|---|---|---|
| White | 60.8 | 31 .2 | 28.9 | 41 .4 | 0.96 |
