To seal interior drywall, plaster, cinder block, wall board, celotex and other similar porous interior surfaces, prior to other finish coatings. May also be used over properly primed metal and wood.
PROPERTIES & ADVANTAGES – This vinyl acrylic emulsion sealer has taken over the lead in the paint industry with its positive, advanced sealing properties. It is easy to apply, dries in 1/2 hour and is remarkably free from odor.
FINISH – Satin Sheen (60° Gloss – 20+)
COLORS – White
SPREADING RATE – 500 sq. ft. at 1 mil dry film thickness
DRYING TIME – 30 minutes tack free 1 hour dry
VISCOSITY – 65 – 75 KU
THINNING – Water
SURFACE PREPARATION – Surface must be clean and dry. Remove grease, wax and oil by scrubbing with suitable paint cleaner. Plaster and masonry should be cured or aged a reasonable length of time before priming.
APPLICATION – Brush – Roller – Spray Keep from freezing. Use in temperatures above 50°F.
EQUIPMENTCLEAN UP – Water
PACKAGING – Gallons – 5 Gallon Pails – 55 Gallon Drums
FLASH POINT – None
GRIND (HEGMAN) – 7+
| COLOR | % TOTAL SOLIDS | % PIGMENT SOLIDS | % VEHICLE SOLIDS | % VOLUME SOLIDS | CONTRAST RATIO |
|---|---|---|---|---|---|
| White | 46.0 | 24.0 | 22.0 | 31 • 7 | — |
