SELF-LEVELING CATALYSIZED EPOXY FLOOR COATING

Industrial floors with heavy traffic where a finish with good durability is desired. Epoxy type floor coatings are well suited for use in high demand environments such as breweries, chemical plants, food processing plants, hospitals, petroleum refineries, and warehouses.

PROPERTIES & ADVANTAGES – Self-leveling, catalyzed epoxy floor coating has outstanding mechanical strength and excellent abrasion and chemical resistance. This system can bond to a variety of substrates at room temperature with minimal evolving of volatile by- products; and shows very low shrinkage. Epoxy floor coating is a 2 component material and is self-leveling.

FINISH – Gloss, Semi-Gloss (Anti-Skid if desired)

COLORS – As desired

SPREADING RATE – 5 sq. ft. per gallon at 1/4″ dry film thickness or 10 sq. ft. per gallon at 1/8″ dry film thickness.

DRYING TIME – o hours

VISCOSITY – Intermix – pourable

SURFACE PREPARATION – Surface should be clean, dry and free of all foreign substances. Prepare surface with TCB Epoxy Floor Pretreatment compound #599. Wait 30-60 minutes then pour on intermixed Epoxy floor coating evenly and let it cure for 8-10 hours. (See directions)

APPLICATION – After thoroughly mixing Components A & B, pour onto area to be covered and spread evenly with a plastic or rubber-comb. Follow directions provided.

EQUIPEMNT CLEAN UP – Epoxy Reducer

PACKAGING5 Gallon Kit 1 Gallon Kit

FLASH POINT – 225°F

ANALYSIS(Intermixed) – Weight per Gallon 13.8 lbs/gallon % Solids by WT 100.0% % Solids by VOL 100.0%