Open/Close Menu Custom Paints & Coatings

CONTACT US NOW
sales@tcblends.com

CALL US NOW:
810-407-6937

For interior walls or ceilings of plaster, wall board, drywall, wallpaper, concrete, brick, wood and metal which have been properly sealed or primed.

PROPERTIES & ADVANTAGES – Coloramic Latex Flat is an emulsion type rubber latex base paint which is self-sealing, fast drying and very washable. It spreads evenly to a smooth velvet finish. Skips may be touched up hours later without showing and it dries lap free in 30 minutes

FINISH – Flat (600 Gloss – 0-5)

COLORS – As desired

SPREADING RATE – 510 sq. ft. at 1 mil dry film thickness

DRYING TIME – 30 minutes tack free 2-4 hours dry

VISCOSITY – 75 – 85 KU

THINNING – Water

SURFACE PREPARATION – Surface should be clean, dry and free of loose scaly paint. Unpainted plaster and bare wood should have 1 coat B-B Pigmented Sealer. Prime bare metal with TCB Metal Protective Primer. Coloramic Latex Flat may be applied directly over wallpaper, drywall and masonry but, 1 coat of TCB Triple Sealer followed by 1 coat Coloramic Latex Flat will give a more satisfactory finish on these surfaces. One coat over repaint work in good condition is usually sufficient.

APPLICATION – Brush – Roller – Spray Keep from freezing

PACKAGING – Gallons – 5 Gallon Pails – 55 Gallon Drums

FLASH POINT – None

GRIND (HEGMAN) – 6+

COLOR % TOTAL SOLIDS % PIGMENT SOLIDS % VEHICLE SOLIDS % VOLUME SOLIDS CONTRAST RATIO
White 53.0 41 .0 12.0 32.0 0.97
© 2018 TC Blends