Open/Close Menu Custom Paints & Coatings

CONTACT US NOW
sales@tcblends.com

CALL US NOW:
810-407-6937

For properly primed and sealed interior surfaces of plaster, wood, drywall, concrete, brick, wall board, and metal.

PROPERTIES & ADVANTAGES – Coloramic Alkyd Gloss is a low odor alkyd enamel, formulated to provide a dense, impervious film on all interior surfaces. It is easily applied, and flows out evenly to produce a rich hi gloss finish for unexcelled wash-ability and mar resistance.

FINISH – 600 Gloss – 75+ (Gloss)

COLORS – As desired

SPREADING RATE – 850 sq. ft. at 1 mil dry film thickness

DRYING TIME – 4-6 hours tack free – 10-12 hours dry

VISCOSITY – 65 – 75 KU

THINNING – Mineral Spirits or Odor no

EQUIPMENT CLEAN UP – Mineral Spirits

SURFACE PREPARATION – Surface should be clean, dry and free from loose scaly paint. Unpainted plaster and wood should be given 1 coat of TCB Pigmented Sealer and 1 coat of TCB Enamel Undercoat prior to 1 coat of Coloramic Alkyd Gloss. Prime bear metal with a TCB Metal Protective Primer followed by 1 coat of TCB Enamel Undercoat and 1 coat of Coloramic Alkyd Gloss. Seal drywall and other porous surfaces with 1 coat of TCB Triple Sealer and 1 coat of TCB Enamel Undercoat followed by 1 coat of Coloramic Alkyd Gloss. Repaint work with flat finishes should be treated as new work.

APPLICATION – Brush – Roller – Spray

PACKAGING – Gallons – 5 Gallons Pails – 55 Gallon Drums

FLASH POINT – 105

GRIND (HEGMAN) – 7

COLOR % TOTAL SOLIDS % PIGMENT SOLIDS % VEHICLE SOLIDS % VOLUME SOLIDS CONTRAST RATIO
White 70.3 29.5 40.8 53.8 0.97
© 2018 TC Blends