Open/Close Menu Custom Paints & Coatings

CONTACT US NOW
sales@tcblends.com

CALL US NOW:
810-407-6937

To seal unpainted interior plaster, wall board, cement, brick, and wood surfaces or previously painted surfaces in poor condition.

PROPERTIES & ADVANTAGES – Alkyd Pigmented Sealer is a low sheen, medium oil type sealer that assures positive sealing. The highly developed penetration control gives a uniform film of sealer over entire surface to assure an even finish coat of flat, semi or gloss.

FINISH – Flat (60° Gloss – 5-10)

COLORS – White (May be tinted to desired shade)

SPREADING RATE – 450 sq. ft. at 1.3 mil dry film thickness

DRYING TIME – 4 hours tack free 12 hours to recoat

VISCOSITY – 65 – 75 KU

THINNING – Mineral Spirits

SURFACE PREPARATION – Surface should be clean, dry and free from loose scaly paint. New plaster should be allowed to cure a reasonable length of time. Bare metal should have 1 coat TCB Metal Protective Primer.

APPLICATION – Brush – Roller – Spray

EQUIPMENT CLEAN UP – Mineral Spirits

PACKAGING – Gallons – 5 Gallon Pails – 55 Gallon Drums

FLASH POINT – 100°F

GRIND (HEGMAN) – 6-

COLOR % TOTAL SOLIDS % PIGMENT SOLIDS % VEHICLE SOLIDS % VOLUME SOLIDS CONTRAST RATIO
White 61 .0 37.0 24.0 45.0 0.94
© 2018 TC Blends