A gloss finish for trucks, equipment and auto finishes
PROPERTIES & ADVANTAGES – An acrylic modifies alkyd enamel with excellent gloss and color retention.
FINISH – 60° Gloss – 75+ (Gloss)
COLORS – As desired
SPREADING RATE – 575 sq. ft. at 1 mil dry film thickness
DRYING TIME – 30 Minutes tack free 1-2 hours dry
VISCOSITY – 20-25 Sec. reduced 20% with Xylol on #4 Ford Cup
THINNING – Xylol
SURFACE PREPARATION – Surface must be clean, dry and free from wax, grease, oil and loose scaly paint. Bare metal should be primed with a suitable TCB Metal Protective Primer. Follow with 1 or 2 coats of Acrylic Auto Enamel as required.
APPLICATION – Spray
EQUIPMENT CLEAN UP – Xylol
PACKAGING – Gallons – 5 Gallons Pails – 55 Gallon Drums
FLASH POINT – 80° F
GRIND (HEGMAN) – 7
| COLOR | % TOTAL SOLIDS | % PIGMENT SOLIDS | % VEHICLE SOLIDS | % VOLUME SOLIDS | CONTRAST RATIO |
|---|---|---|---|---|---|
| White | 54.5 | 26.3 | 28.2 | 36.0 | 0.97 |
